Bixpy Power-Pole Adaptor
Recommended Accessories
Bixpy Pole Steering with Telescopic Handle
Bixpy Hobie Pro Angler Triple Mount Plate
Bixpy Hobie Compass Mount Plate
Bixpy Old Town Power Pole Angle Correction Plate
Bixpy Motor Mount for Power-Pole Installation Points
This adaptor allows you to easily fit a Bixpy motor to any kayak that features Power-Pole mounting points at the stern including:
- 2019+ Hobie Outback
- 2025+ Hobie Pro Anglers
The mount utilises the Power-Pole mounting points at the back of the Outback / PA - there are 4 x moulded-in threaded brass inserts, designed for the Power-Pole. This adaptor can be bolted straight onto these inserts! Once you have your Bixpy K-1 Motor Kit, all you will need is this adaptor to get it up and running on your 2019+ Outback or 2025+ Pro Angler.
The adaptor is quick-release, making it easy to put on and take off the motor at the start and end of each session. The adaptor is hinged to allow the motor to be hauled up out of the water for launching and landing. As standard the adaptor is locked into a 0-degree setting so that steering is achieved using the existing rudder on the Outback. Set screws can be removed to allow for 270-degree of steering rotation should you want to add an alternative steering mechanism such as the Pole Steering. This adaptor includes all hardware required to fit to the Outback 2019+ and Pro Angler 2025+.
Can also be used on other models but an additional mounting plate or installation accessories is required:
- Hobie Compass & Compass Duo - requires Bixpy Hobie Compass Mount Plate
- Pre-2025 Hobie Pro Anglers - requires Bixpy Hobie Pro Angler Triple Mount Plate
- Old Town Sportsman 106 & 120 PDl - requires Bixpy Old Town Power Pole Angle Correction Plate
- Hobie Passport 12.0 - requires hull access to bolt-on via Hobie Twist-N-Seal 8in Hatch Kit
Features
- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 8" to 13" from bottom of plate to bottom of motor - it is recommended that the bottom of your motor be about 3" to 5" below the waterline and more in choppy water as necessary
- 270° of rotational trim - adapter ships with set screws in place. To achieve steering, set screws must be removed.
- Includes all hardware required to attach to the Power Pole mounting point on the Outback 2019+ or Pro Angler 2025+
Huge Savings On 1000s Of Products!
rnwall