Hobie Mirage Drive Fins & Masts
Turbo Fin Upgrade Kits and Replacement Fins and Masts
Turbo Fin Upgrade Kits and Spare/Replacement Fins and Masts for your Mirage Drive system! Available for V1, V2, GT and MD180 Mirage Drives.
- V1 drives have a sprocket/mast connection that uses a set screw. This system was used on Mirage Drives pre-2009.
- V2 drives have a threaded sprocket/mast connection. This system is used on V2 Mirage Drives from 2009 to 2015.
- GT drives use roller bearings in pivoting components e.g. sprockets/drums/idler pulley. This system is used on Mirage Drives from 2015 to present. GT drives also use some V2 components.
- MD180 V1 drives uses many new parts but does use some GT and V2 components. This system was used on 2017 kayaks.
- MD180 V2 drives feature some upgraded components from the MD180 V1. This system is used from 2018 to 2020.
- GT Kick Up drives features Kick-Up Fins. This system is used on select models from 2020 to present.
- MD180 Kick Up drives similar to the MD180 V2 but uses Kick-Up Fins. This system is used from 2020 to present.
If you are unsure of compatibility between accessories, parts and your drive system then give us a call.
Hobie Mirage Drive Turbo Fin Kits
Increase your top end speed and lower your cadence (rate of pedalling) with Turbo Fins for your Mirage Drive. These kits allow you to upgrade your drive to the longer and faster Turbo Fins.
Faster fins for your Hobie! This kit is for the Mirage Drive 180 Kick Up or GT with Kick Up Fins only - found on most 2020+ Hobie models.
Longer fins for more speed on your Hobie Kayak. This kit is for the Mirage Drive 180 only and V2 kits and V1 to V2 upgrade kits are available.
The ST (Square Tip) Turbo fins are a fin with greater surface area to provide greater resistance through the water for more thrust! Kits available for Mirage Drive V2 and older V1 systems.
Hobie Mirage Drive Fins
Spare and replacement fins for the Hobie Mirage Drive system. Fins available for V2/GT, MD180 (Kick-Up and non Kick-Up) and MD360.
Replacement fins for Kick-Up Mirage Drives. Standard and Turbo fins available.
Replacement fins for the Mirage Drive 180 V2 system. Standard and turbo length fins available.
Replacement square-tip ST fins for Mirage Drive V1, V2 and GT. Standard and Turbo lengths available.
A replacement Kick-Up Turbo Fin for the Hobie Mirage Drive 360. Also fits non-kick-up Mirage Drive 180.
Hobie Mirage Drive Fin Masts
Spare and replacement fin masts for the Hobie Mirage Drive system. These metal fin rods are designed to bend and break before causing damage to other drive components.
Replacement fin masts for Hobie kick-up Mirage Drives. Standard and Turbo lengths available.
Replacement fin masts for the Mirage Drive 180 V2 system. Standard and turbo lengths available.
Replacement fin masts with threaded end for V2 & GT Mirage Drives. Standard and Turbo lengths available.
Huge Savings On 1000s Of Products!
rnwall