YakAttack Lever Lock Anchor Trolley HD

Quality Anchor Trolley System for Kayaks

The YakAttack LeverLoc Anchor Trolley system has been purpose designed to make anchoring your kayak much easier. This system allows you to set your anchoring line off the bow or stern of your kayak to safely anchor your craft in-line with the wind, tide or current. Featuring low-profile Stealth Pulleys for smooth operation of the trolley system. A system of PadHooks keep the top line of the trolley pinned to the kayak, with the bottom line kept neatly in place under a hook. This keeps your anchor trolley tight to the hull without wanting to cross over the deck and cause a hindrance whilst you fish.

Supplied with 35ft / 10m of reflective USA-made 550 paracord to run between the pulleys. The 'Easy-Knot' Trolley Ring allows you to easily pass your anchor line through to then shuttle back and forth along the kayak. Thanks to the neat design, the trolley ring makes it easy to make tension adjustment to the trolley line, simply by pulling on the cord and re-tying a knot. The trolley ring easily passes through the PadHooks alongside the kayak. Once in the desired position, you simply flick a lever to lock off the trolley line using the LeverLoc system.

This is the LeverLoc HD kit, which includes backing plates and bolts for pulley installation on the kayak. Access to the back of the installation area is required. When access is not possible, we recommend the use of the YakAttack Rigging Bullets 10-32 (sold separately).

LeverLoc HD Anchor Trolley Components:

• 35ft / 10m of reflective USA-made 550 paracord
• 2 x YakAttack Stealth Pulleys with Backing Plates
• 4 x PadHooks
• 1 x LeverLoc
• 1 x Easy-Knot Trolley Ring
• Rigging screws and bolts
• Instructions

You can use the LeverLoc Anchor Trolley system with a Quick-Release Anchor System, Simple Anchoring System or a Drogue / Drift Chute.