Fish Finder Installation Accessories for Kayaks

A range of sealed lead-acid batteries for powering fish finders and other marine electronics. Sealed maintenance-free design. Easy to recharge using a 12v trickle charger.

A lightweight lithium ion power source for running your fish finder, GPS and other electronics! Durable and water-resistant. Includes charger and wiring connectors. 10Ah and 20Ah sizes available.

A lightweight and IP-67 waterproof lithium battery pack with 12V and USB ports for powering and charging electronic devices including phones, tablets, cameras, fish finders, inflation pumps and more! Includes charger, EVA travel case, 12V bare end wiring and a 12V cigarette connector.

A simple battery charger for small lead acid batteries. 4-step charging process with automatic cut-off once charged.

The Oximiser 900 is a charging system designed specifically for smaller batteries up to 30AH. Features a digital display with battery level indicator and charging level. 6 stage management system ensures your battery is charged correctly.

A handy way to keep your battery dry, whether your keeping it in the hull or up on deck.

A pair of insulated spade end terminal connectors for fish finder battery connections. Fit 6.3mm spade connections. 

Scanstrut Cable Seals provide waterproof cable routing for installing cables through the hull of your kayak. It is ideal for installing most fish finder units, as well as other electrical devices where cables must pass through the hull.

These Hobie Thru Hull Wiring Kits are great for the waterproof routing of wiring through the kayak hull from the cockpit into the hull (or vice-versa). Perfect for fish finders, GPS units and more! Can be installed on any kayak.

A strong and flexible waterproof adhesive. Ideal for glueing a fish finder transducer to the hull of a kayak. Also useful as a sealent when installing other accessories. Supplied as a 300ml cartridge tube.

A brilliant solution for mounting your transducer on an arm over the side of your kayak. The arm can easily be deployed and retreived when launching and landing to prevent damage to your transducer. Compatible with virtually any transducer and any kayak!

Install the Lowrance Lowrance Triple Shot Transducer to the Lowrance-Ready system on your Hobie Kayak with this transducer mount.

Ideal for glueing a fish finder transducer to the hull of a kayak. Also useful as a sealent when installing other accessories. Supplied as a 3.7 fl.oz tube.

Quick and easy mounting system for your fish finder transducer. The arm goes over the side of the kayak and into the water, giving the best sonar reading possible! Retractable in shallow water.

Quick and easy mounting system for your fish finder head unit and transducer. The head unit is mounted on a platform and the transducer is mounted on an arm that goes over the side of the kayak and into the water, giving the best sonar reading possible!

A pole for mounting and controlling Live Sonar Transducers on fishing kayaks. Quick and easy control of Garmin LiveScope, Lowrance Active Target & Humminbird MEGA imaging transducers.

A useful kit from lowrance that allows you to install a transducer through a kayaks scupper hole. Compatible with select Lowrance fish finders including the Hook Reveal series with the 83/200 HDi transducer. Not compatible with Hook2 series.

All the necessary hardware to fit a fish finder to a Viking Kayaks ProFish Reload, ProFish 400 or ProFish GT.

Install a Garmin SideVu Transducer to the Lowrance-Ready system on your Hobie Kayak with this transducer mount.

Install the Lowrance TotalScan and 3 in 1 Ready Side Scan Transducers to the Lowrance-Ready system on your Hobie Kayak with this transducer mount.

Improve your fish finder viewing experience with a visor. Reduce spray on the screen and improve clarity in bright light. Designed for the Lowrance Eagle models.

A screen visor for your Lowrance Hook2 4x / 4x GPS fish finder. Add a visor to your unit and expereince a number of benefits including less spray on the screen and easier viewing in bright light conditions.

Improve your fish finder viewing experience with a visor. Reduce spray on the screen and improve clarity in bright light. Designed for the Lowrance Hook Reveal models.

A shield for the screen on a Lowrance Elite FS fish finder. A really useful accessory to reduce sun glare and spray build-up on the screen.

Reduce screen glare in bright light and improve clarity, reduce spray, reduce operating temperature in the sun and save battery with this visor for your Garmin Striker Plus / Vivid fish finder.

A screen shield designed for the Garmin Striker 4. Greta for reducing sun glare on the screen and also reducing spray build-up for an overall better viewing experience of your fish finder unit.

A screen shield designed for the Garmin Echomap series. Reduces sun glare on the screen and also reduces spray build-up. Enhances the viewing experience of your fish finder screen.

Reduce screen glare in bright light and improve clarity, reduce spray, reduce operating temperature in the sun and save battery with this visor for your Raymarine Dragonfly fish finders.

Keep your fish finder connector plugs in top condition with a silicon rubber Connector Protector. Great for keeping your transducer, power, NMEA or Ethernet plugs dry when not connected to your fish finder.

High performance water displacement product designed as corrosion prevention and inhibiting compound with the added advantage that it will stop existing corrosion. Great for protecting kayak pedal drive systems, fishing equipment and more from saltwater corrosion.

Waterproof marine grade grease that is excellent for preventing saltwater corrosion. Great for preventative maintenance on kayak pedal drive systems, protecting electronics terminals and many other marine uses!