Home >> Equipment >> Electric Outboard Motors >> Bixpy K-1 Motor Adaptors
A range of adaptors to allow you to fit a Bixpy K-1 Motor Kit to almost any small watercraft! Adaptors available for kayaks, canoes, SUPs, dinghies, small boats and more. In many cases these adaptors will also fit J-2 motors - refer to the prioduct page for compatability.
Easily fit a Bixpy K-1 or J-2 Motor to the Power-Pole mount on a 2019 and newer Hobie Outback using this adaptor.
Fits: K-1 & J-2 Motors
Easily fit a Bixpy K-1 or J-2 Motor to the Power-Pole mount on a Hobie Pro Angler 12 or 14 using this adaptor.
Fits: K-1 & J-2 Motors
Easily fit a Bixpy K-1 or J-2 Motor to the Power-Pole mount on a Hobie Compass using this adaptor.
Fits: K-1 & J-2 Motors
This adaptor will fit onto the Pedal Drive mounts on most fin-driven kayaks including the rotomoulded Hobie Mirage Drive Kayak range, Hobie Lynx & Hobie Inflatable series.
Fits: K-1 Motor Only
This adaptor will allow you to fit a Bixpy K-1 & J-2 Motor to the Twist-N-Stow Rudder Blade on a Hobie Kayak.
Fits: K-1 & J-2 Motors
This adaptor will fit all Feelfree Kayaks that have a Sonar Pod allowing you to add a K-1 Motor to your Feelfree Kayak with ease.
Fits: K-1 Motor Only
Easily install a Bixpy K-1 Motor to a Pod or other flat surface using this DIY Pod Adaptor.
Fits: K-1 Motor Only
A rudder blade that allows you to add-on a Bixpy Motor. Comes with a 10mm rudder pin that will work with most rudder mounts allowing this adaptor to be used with almost all ruddered or rudder-ready kayaks. Simply switch out your exisiting rudder for this adaptor to make your kayak Bixpy ready!
Fits: K-1 & J-2 Motors
Fit a Bixpy K-1 & J-2 Motor to virtually any kayak or small watercraft with this Universal Adaptor. A great option if there is not a dedicated adaptor for your craft. Some level of DIY is required for installation of this adaptor.
Fits: K-1 & J-2 Motors
A simple bolt-on bracket that allows you to add a Bixpy K-1 & J-2 Motor to any flat surface.
Fits: K-1 & J-2 Motors
A glue-on plate allowing you to add a Bixpy Motor Fin Adaptor to almost any inflatable craft including kayaks and SUPs. Adhesive and Fin Adaptor required.
Easily add a Bixpy K-1 or J-2 Motor to a Slide and Lock Fin Plate (found on many SUPs) with this adaptor.
Fits: K-1 & J-2 Motors
Easily add a Bixpy K-1 or J-2 Motor to a US Fin Box (found on some SUPs) with this adaptor.
Fits: K-1 & J-2 Motors
A glue-on adaptor allowing you to add a Bixpy K-1 or J-2 Motor to almost any inflatable craft including kayaks and SUPs. Adhesive required.
Fits: K-1 & J-2 Motors
Easily fit a Bixpy K-1 & J-2 Motor to your small boat, tender, dinghy or SIB with this Transom Adaptor. Also works with some kayaks that have a transom.
Fits: K-1 & J-2 Motors
