Give us a call on 01726 862798 if you have any questions about the Lowrance Hook-2 4x GPS Fish Finder with Bullet Transducer
Lowrance Hook-2 4x GPS Fish Finder
Fish Finder with Basic GPS
An easy to use fish finder with wide-angle broadband sonar, a simple GPS plotter and 4 inch colour screen. Superb value for money. Includes the Lowrance Bullet Transducer.
Price:£129.99 (RRP £139.99 - Saving £10.00)
- More Info
- In The Box
- Mounting Options
- Transducer Installation
- Power Options
- Video
Lowrance Hook-2 4x GPS Fish Finder with Bullet Transducer
The new Hook-2 4x GPS from Lowrance is an easy to use colour fish finder-chartplotter combo, ideal for kayak fishing. The 4 inch SolarMAX™ Colour Screen displays your sonar readings and GPS plotter in an easy to understand format. The clear screen is visible in bright and low light conditions. See the bottom structure and any fish in the water column in crisp clear colour so that you know excatly where to fish! The wide-angle broadband sonar shows up bottom structure well, whilst picking up any fish swimming around beneath your craft with large fish arches.
The simple and accurate GPS plotter allows you to save waypoints, follow trails and navigate to your favorite fishing spot.
Lowrance have made this one of the easiest fish finders to use by making simple to follow menu's and by using automated sonar settings - less time messing with settings and more time fishing! The fish finder has various alarm setting for fish, depth and shallow water so you know when start fishing or stop your craft.
This unit offer superb value for money, especially with the addition of the GPS plotter. A great unit for kayak fishing!
Features
- 4-inch SolarMAX™ Colour TFT Screen
- Automated sonar settings
- Easiest-to-use menu operation and Dedicated Keypad
- Lowrance® Wide-Angle Broadband sonar
- Save waypoints, follow trails and navigate to your favorite fishing spot with a simple and accurate GPS Plotter.
- Easy front-dash or quick-release bracket mounting installation
- Power Supply: 12V
- Sonar Max Power: 200W RMS
- Sonar Frequency: Wide Angle 200 kHz
- Max Sonar Depth: 500ft (152m)
- Sonar Alarm: Fish, Depth, Shallow
- GPS Type: Internal high-sensitivity WAAS + EGNOS + MSAS
- Memory - Waypoints: 1000*
- Memory - Routes: 6 (150 max. route point per route)*
- Memory - Trails: 7 trails (4,000 max. trail points)
- *Waypoints and Routes share the same memory, saving more of one means less of the other
Need a visor for your fish finder? Reduce sun glare and spray build-up with a screen visor! We sell the BerleyPro Visor for the Lowrance Hook2 4x GPS - Click Here to find out more.
Whats Included In The Box?
- HOOK2 4x/5x Quick Release Bracket
- Bullet Skimmer Transducer & Power Cable
- Bullet Transom Bracket
- Fuse & Fuse Holder
- Instructions
If you need to know what else If you need to install a Fish Finder to your kayak, please refer to our Fish Finder Buyers Guide
Mounting Options - Fish Finder Headunit
RAM 1in Ball Fishfinder Mount for the Lowrance Hook² & Reveal Series
This mount neatly attaches to the back of Lowrance Hook2 4 and Hook Reveal series Fish Finders. Infinite angle adjustment with Ram Mounts ball and socket technology.
Price £37.79 (RRP £41.99 - Saving £4.20)
Railblaza R-Lock Fish Finder Mount for Hook2 & Reveal
Easily mount a Lowrance Hook2 4x or Reveal with the Railblaza Hook2 R-Lock mount. This mount features lockable friction joints and a centre joint that is fully adjustable in 15-degree increments, meaning that you can position your fish finder at the angle you want. Will hold a fish finder upto 1.5kg in weight. Simply mount onto any Railblaza StarPort base mount.
Starport base mount required - sold seperately
Price £32.36 (RRP £35.95 - Saving £3.59)
Well Nuts with Marine Grade Stainless Steel M5 Bolts - Pack of 4
These are one of the best choices for mounting hardware and work perfectly for mounting a fish finder base mount to your kayak.
Price £3.99
Marine Tri-Fold Rivets - Pack of 10
The ideal choice of fixing to use when mounting fishfinder mounts & bases to your kayak when you cannot gain access to inside the hull.
Price £6.50
Stainless Steel Fitting Kit - M5 - Bolts/Washers/Nuts
Bolts, Nuts and Washers are the strongest option for fixing an accessory to your kayak. Supplied as a pack of 4. M5 bolt size and made from A4 (316) Marine Grade Stainless Steel. M5 fits Ram Mount bases, many fish finder bases and can be used for many other fitting applications
Price £2.99
If you need any help on deciding which mounting option is best for you, please refer to our Fish Finder Buyers Guide
Transducer Installation Options
If you would like more info on installing a transducer to your kayak, please refer to our Fish Finder Buyers Guide
In-Hull Installation
Sikaflex EBT+ Clear - Transducer Adhesive
A strong and flexible waterproof adhesive. Ideal for glueing a fish finder transducer to the hull of a kayak. Also useful as a sealent when installing other accessories. Supplied as a 300ml cartridge tube.
Price £11.95
Scanstrut Deck Seal - Cable Gland - Upto 30mm
A Cable Gland is the best option for routing the transducer cabling from the Fish Finder headunit down in through the kayak hull. This is the correct sized cable gland for the Lowrance Transducer Cabling. It can also be used for routing the battery cables inside the hull.
Price £29.70
Arm-Mounted Installation
RAM Transducer Arm with Diamond Base
Compatible with both Lowrance and Humminbird Transducers, this arm allows you to hang your transducer directly over the side of your kayak and into the water. This makes for a quick release mounting system.
Price £50.39 (RRP £55.99 - Saving £5.60)
Scotty Kayak Transducer Arm with Gear Head Track Mount
An adjustable fish finder transducer mounting arm for slide tracks. The arm goes over the side of the kayak and into the water, giving clear sonar readings. Retractable in shallow water. Includes the Scotty Gear Head Track Adaptor and 4in Low Profile Track.
Price £33.74 (RRP £44.99 - Saving £11.25)
Railblaza Transducer Arm XL - 700mm
The Transducer Arm XL is an easy way to mount your fish finder transducer. Simply bolt the transducer to the bottom of the arm and mount the arm to your kayak! NOTE: This kit requires a Sideport to mount the transducer arm. These can either be fixed straight to the hull of the kayak using the fixings supplied with the ports, or they can be mounted on slide tracks, as shown in the images above, using the appropriate TracMount Kit.
Price £41.36 (RRP £45.95 - Saving £4.59)
Fish Finder - Power Options
12v 7ah SLA - Fish Finder Battery
Ideal for powering your Fish Finder. A 12V 7aH SLA battery provides ample charge for 1-2 fishing sessions. Once the battery charge has been run down it needs to be recharged and this is best done using a 12V trickle charger.
Price £26.00
Feelfree 5 Litre Dry Tube - Battery Bag
A great option for dry storing your Fish Finder battery inside the hull of your kayak. This power cables can easily roll down with the top of the dry bag, whilst still making a dry seal.
Price £15.95
Scanstrut Deck Seal - Cable Gland - Upto 16mm
A Cable Gland is the best option for routing the power cabling from your Fish Finder Headunit in through the hull and to your battery. This is the correct size for just the battery cable to pass through.
Price £29.70
If you would like more info on powering your Fish Finder, please refer to our Fish Finder Buyers Guide
